Black On Wood

My 2017 6x6s drying in studio

RoCo’s 6×6 deadline is rolling around again. As with everything else I do, I always seem to get a late start. I’ve working with this rough cut lumber the last few years. The wood that I have, stuff Pete and Shelley brought me from a sawmill in the Adirondacks, isn’t wide enough to make up the six so I rip the boards and glue them together.

The last couple of years I went with a 3 to 1 ratio with with the board widths and this year after much contemplation I decided to make them each one half. I deliberately chose a light board to cope with a dark board. This arrangement called for a centered application of the color. You are allowed to submit four pieces and I wanted each to be unique so I plan to have the light portion on the bottom in two, one with black around the perimeter and the other with the black in the center square. I usually mess a few up so I made a few extras.

It has been three days now and the heavy application of Ivory Black oil paint is still wet. Artwork is due 10d 6h 32 35s according to their site.

2 Responses to “Black On Wood”

  1. Claire Says:

    My 2017 6x6s involve gluing wood as well. But they look nothing like yours.

  2. Paul Says:

    I will look for yours but that is not much to go on.

Leave a Reply

Paul